Skirt is a plugin to give the extruder some extra time to begin extruding properly before beginning the object, and to put a baffle around the model in order to keep the extrusion warm.
The skirt manual page is at:
http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skirt
It is loosely based on Lenbook's outline plugin:
http://www.thingiverse.com/thing:4918
it is also loosely based on the outline that Nophead sometimes uses:
http://hydraraptor.blogspot.com/2010/01/hot-metal-and-serendipity.html
and also loosely based on the baffles that Nophead made to keep corners warm:
http://hydraraptor.blogspot.com/2010/09/some-corners-like-it-hot.html
If you want only an outline, set 'Layers To' to one. This gives the extruder some extra time to begin extruding properly before beginning your object, and gives you an early verification of where your object will be extruded.
If you also want an insulating skirt around the entire object, set 'Layers To' to a huge number, like 912345678. This will additionally make an insulating baffle around the object; to prevent moving air from cooling the object, which increases warping, especially in corners.
Operation
Settings
Convex
Gap over Perimeter Width
Layers To
Examples
Classes | ||||||||||||||||||||||||||
|
Functions | ||
|
Data | ||
__author__ = 'Enrique Perez (perez_enrique@yahoo.com)' __date__ = '$Date: 2008/21/04 $' __license__ = 'GNU Affero General Public License http://www.gnu.org/licenses/agpl.html' absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384) |
Author | ||
Enrique Perez (perez_enrique@yahoo.com) |